National Instruments FP-3000 Bedienungsanleitung Seite 67
- Seite / 118
- Inhaltsverzeichnis
- FEHLERBEHEBUNG
- LESEZEICHEN
Bewertet. / 5. Basierend auf Kundenbewertungen
Chapter 4 Block Reference
©
National Instruments Corporation 4-15 FieldPoint FP-3000 User Manual
FP_AO_200_RANGE
Allows the range of a channel on a FieldPoint FP-AO-200 to be adjusted.
FP_CJC_SOURCE
Allows the cold junction compensation to be adjusted on a FP-TC-120
module.
Note
Cold junction compensation is global to the entire module and affects every channel
on the module.
FP_MOD_STATUS
The status of the FieldPoint I/O module associated with the function block.
FP_NOISE_REJECTION
Allows the noise rejection filter of an Analog Input module to be adjusted.
Table 4-10.
Module Status
Status Description
No Base There is no terminal base in the specified
module position.
Base, But No Module There is a terminal base in the specified
module position, but no module is installed
in the base.
Unconfigured Module There is a module in the specified position,
but the FP-3000 is unable to configure it.
Module in
Configuration
There is a module in the specified position,
the FP-3000 has attempted to configure the
module, and the module is in the process of
configuration.
Module Okay There is a module in the specified position,
and it is configured and operating correctly.
Incorrect Module
for Block
There is a module in the specified position,
but the block is incompatible with the
module.
- FieldPoint 1
- FP-3000 1
- Network Module User Manual 1
- Important Information 3
- Chapter 3 5
- Chapter 4 6
- Contents 10
- About This Manual 13
- FP-3000 Network Module 14
- Overview 14
- Function Blocks 16
- PID Control 16
- Block Instantiation 16
- Interoperability 17
- HotPnP (Hot Plug and Play) 17
- Field Upgradability 17
- Figure 2-5 21
- DIN Rail Clip 21
- Figure 2-9 25
- Connect Power to the FP-3000 26
- Power-On Self Test (POST) 27
- LED Indicators 29
- Updating the FP-3000 Firmware 32
- Example Applications 36
- Fieldbus Using FP-3000 37
- Assign a Tag to the New Block 38
- Select the Module and Channel 38
- Set the Input Range 39
- Scale the Reading 39
- Set Up Scheduling 40
- Bring the Block Online 41
- Getting Started 41
- Taking Temperature Readings 42
- Create an FP-TC-120 Block 42
- Controlling a Heating Element 45
- Set the Output Range 46
- Scale the Output 46
- Instantiate a PID Block 48
- Scale the PID 48
- Tune the PID 50
- Alarming 50
- PV_SCALE 51
- HI_ALM parameter. The 52
- Block Reference 53
- Types of Function Blocks 54
- DI (Discrete Input) 55
- DO (Discrete Output) 55
- CDO (Complex Discrete Output) 55
- Chapter 4 Block Reference 56
- UNACKNOWLEDGED 59
- ALARM_STATE/UPDATE_STATE 59
- TIME_STAMP 60
- Status Handling 60
- Substatus 61
- Target Mode 62
- Actual Mode 63
- Permitted Mode 64
- Normal Mode 64
- FP-3000 Specific Parameters 65
- FIELDPOINT_CHANNEL 66
- FIELDPOINT_MODULE 66
- FP_AI_100_RANGE 66
- FP_AI_110_RANGE 66
- FP_AI_111_RANGE 66
- FP_AO_200_RANGE 67
- FP_CJC_SOURCE 67
- FP_MOD_STATUS 67
- FP_NOISE_REJECTION 67
- VERSION_INFORMATION 69
- Configuring the FP-3000 70
- Write Lock 71
- Troubleshooting 72
- Appendix B Troubleshooting 73
- I/O Module Problems 74
- Fieldbus Parameters 78
- Table C-1. Error Codes 80
- BLOCK_RESET 81
- CHECKBACK 81
- CLR_FSTATE 82
- CONFIRM_TIME 82
- CONTROL_OPTS 83
- CYCLE_SEL/CYCLE_TYPE 83
- DD_RESOURCE 83
- FEATURE_SEL/FEATURES 85
- FF_SCALE 85
- Table C-6 87
- Hard Types 87
- IO_OPTS parameter 90
- NV_CYCLE_T 91
- OP_CMD_CXO 92
- OUT_HI_LIM 92
- OUT_LO_LIM 92
- OUT_SCALE 92
- PV_FTIME 93
- RCAS_OUT 94
- ROUT_OUT 94
- RS_STATE 95
- SAFEGUARD_CL 95
- SAFEGUARD_OP 95
- SET_FSTATE 95
- SHED_OPT 95
- SHED_RCAS 96
- SHED_ROUT 96
- SIMULATE 96
- SP_HI_LIM 96
- SP_LO_LIM 96
- SP_RATE_DN 97
- SP_RATE_UP 97
- STATUS_OPTS 97
- UPDATE_EVT 99
- WRITE_ALM 99
- WRITE_LOCK 99
- WRITE_PRI 99
- XD_SCALE 99
- Advanced Function 100
- Block Behavior 100
- BKCAL_IN 101
- BKCAL_OUT 101
- Remote Cascades 102
- Fault State and Mode Shedding 103
- Manual mode 104
- Auto mode 104
- Specifications 105
- Technical Support Resources 106
- Telephone and Fax Support 107
- Glossary 108
Verwandte Produkte und Handbücher für Software National Instruments FP-3000
(108 Seiten)© 2020, manymanuals.de. Alle Rechte vorbehalten. | 0.052 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Kommentare zu diesen Handbüchern