National Instruments SCC-TC Series Thermocouple Input Modules Bedienungsanleitung Seite 3
- Seite / 20
- Inhaltsverzeichnis
- LESEZEICHEN
Bewertet. / 5. Basierend auf Kundenbewertungen
© National Instruments Corporation 3 SCC-TC Series Thermocouple Input Modules User Guide
❑ Numbers 1 and 2 Phillips screwdrivers
❑ Wire insulation strippers
❑ NI-DAQ (current version) for Windows 2000/NT/XP
Note Software scaling of measurements is not supported on the Macintosh operating
system. Refer to the Converting Voltage Measurements to Temperature Measurements
section for more information about measurement scaling.
Unpacking the Module
SCC modules are shipped in antistatic envelopes to prevent electrostatic
damage (ESD) to the modules. ESD can damage several components on
these products.
Caution Never touch the exposed pins of connectors.
To avoid damage from ESD when you handle the module, take the
following precautions:
• Ground yourself by using a grounding strap or by touching a grounded
object.
• Touch the antistatic envelope to a metal part of the computer chassis
before removing the module from the envelope.
Remove the module from the envelope and inspect the module for loose
components or any sign of damage. Notify NI if the module appears
damaged in any way. Do not install a damaged module.
Store the module in the antistatic envelope when it is not in use.
Installing the Module
Caution Refer to the Read Me First: Safety and Radio-Frequency Interference document
before removing equipment covers or connecting/disconnecting any signal wires.
- SCC-TC Series Thermocouple 1
- Input Modules 1
- What You Need to Get Started 2
- Unpacking the Module 3
- Installing the Module 3
- Connecting the Input Signals 4
- Detecting Open Thermocouples 8
- Configuring the SCC System 8
- NI-DAQmx 9
- Traditional NI-DAQ 9
- Calibrating System Offsets 11
- Calibrator 12
- Measurements 12
- Specifications 13
- Amplifier Characteristics 14
- Transfer Characteristics 14
- Measurement Accuracy 14
- Cold-Junction Sensor 15
- Open Thermocouple Detection 15
- Power Requirement 15
- Physical 16
- Maximum Working Voltage 16
- Environmental 16
- Electromagnetic Compatibility 17
- CE Compliance 17
- I/O Connector Pin Assignments 18
- *323099B-01* 20
Verwandte Produkte und Handbücher für Messen, Testen & Steuern National Instruments SCC-TC Series Thermocouple Input Modules
(12 Seiten)Toshiba PSKUNU-008005 manuály
Uživatelské manuály a uživatelské příručky pro Notebooky Toshiba PSKUNU-008005.
Poskytujeme 1 manuály pdf Toshiba PSKUNU-008005 ke stažení zdarma podle typů dokumentů: Datový list
Kommentare zu diesen Handbüchern