National-instruments Measure Data Acquisition Bedienungsanleitung PDF herunterladen (Seite 73)

Troubleshooting

This appendix describes solutions to problems that you might

encounter using the Measure DAQ Add-In.

Problem: No DAQ menu appears.

Solution: From the Tools»Add-Ins. Click on the

Browse button and look for

DAQ.XLA

the directory where you installed Measure.

Once you find it, select it and click on the

OK button. If a dialog box appears with the

message

Replace existing

‘DAQ.XLA’?

click on the Yes button. You

will see a Measure Data Acquisition Add-In

entry in the list box and the checkbox next

to it will be checked. Click on the OK

button.

Problem: The list of data acquisition devices is empty.

Solution: Verify with the NI-DAQ Configuration

Utility (

WDAQCONF.EXE)

that you have

properly installed and configured your

device. Verify that your device is supported

by Measure. Refer to Appendix B, DAQ

Hardware Capabilities.

1 2 ... 68 69 70 71 72 73 74 75 76 77 78 ... 97 98

Keine Kommentare

National-instruments Measure Data Acquisition Bedienungsanleitung Seite 73