National-instruments Two-Slot Embedded Controller NI PXI-8183 Bedienungsanleitung PDF herunterladen (Seite 29)

Chapter 2 Installation and Configuration

NI PXI-8183 User Manual 2-16 ni.com

Upgrading RAM

You can change the amount of installed RAM on the NI PXI-8183 by

upgrading the SO-DIMM.

To upgrade the RAM, remove the NI PXI-8183 from the PXI chassis.

Remove the old SO-DIMM module and install the new SO-DIMM in the

socket as shown in Figure 2-5.

National Instruments offers the following types of SO-DIMMs for use with

the NI PXI-8183 controller.

• 256 MB, 32 MB × 64, 7.5 ns, 1.05 in. max

• 512 MB, 64 MB × 64, 7.5 ns, 1.05 in. max

Note National Instruments has tested and verified that the SO-DIMMs we sell work with

the NI PXI-8183. We recommend you purchase your SO-DIMM modules from National

Instruments. Other off-the-shelf SO-DIMM modules are not guaranteed to work properly.

Figure 2-5. Installing a SO-DIMM in an NI PXI-8183 Controller

(NI PXI-8183 Shown)

1 SO-DIMM Module 2 SO-DIMM Socket

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 68 69

Keine Kommentare

National-instruments Two-Slot Embedded Controller NI PXI-8183 Bedienungsanleitung Seite 29